category type base recommended uses additives administration thermal resistance color pot life(month) properties[1] baking
 
oven dry varnishes Aq-THERM POLYESTER protection in electrical equipment   dipping up to 200 light 12 solveable in water oven dry
BC-365             enviroment friendly
 DOLPHON  EPOXY  refrigrator motors and, etc.  thinner  dipping 180 light 18  compatible with lacquer wires, high resistance against chemicals, solvents and moisture  oven dry
 BC-352                
 HI-THERM  PHENEL AND POLYESTER  general purpose varnish  thinner  dipping with or without vacume  200 light 36  dries to a tough glass film  oven dry
 BC-325            
 HI-THERM  PHENEL AND POLYESTER  general purpose varnish  thinner  dipping up to 195 light 36  flexibility & resistance against corrosive materials  oven dry
 BC-340          
 HI-THERM POLYESTER  general purpose varnish & wound coils  thinner  dipping UP TO 215 light 36  low- priced, adjustable to all kinds of lacquer wires  oven dry
 BC-346-A          
 HI-THERM  POLYURETHANE  general purpose varnish  thinner  dipping 180 light 36  low-priced,fast to dry,high chemical resistance and resistance against and in moisture & corrosive materials  oven dry
 BC-359          
 SYNTHITE    high speed armature assemblies prepared on conveyor systems where a short cycle is imperative  thinner  dipping & trickle   light    adhesive, dries to tough film, high resistance against chemicals,oil & moisture  air dry
 BC-337     160    
                     
                     
 trickle system  DOLPHON CC-1080  POLYESTER  used for transformers, stators & alternator stators & medium speed rotors  dicomponent  VPL,DIP & TRICKLE, ROLL THROUGH  H  light 6  flexible solid material, low viscosity, fast drying  oven dry
 CC-1080      
 DOLPHON  POLYESTER  used on power tools, appliance & automative armatures & electric motor stators  dicomponent  VPL,DIP & TRICKLE, ROLL THROUGH  H  light 6  once shelf life expires, only gel time undergoes a change  oven dry
 CC-1080 L    
 DOLPHON  POLYESTER  used on power tools, appliance & automative armatures & electric motor stators  tricomponent  trickle  H  light 6  low viscosity & good penetration in thin wires, good adhesion  oven dry
 CC-1096  & dicomponent  
 DOLPHON  POLYESTER  used for trickle applications on power tool, automative armatures  dicomponent  trickle    amber light 6  high flame point, adhesible  oven dry
 CC-1106  up to 200  
 DOLPHON  POLYESTER STYRENE-BASED    dicomponent  trickle  H  amber light 3  fast to bake  oven dry
 CC-1260  
                     
                     
winding resins DOLPHON POLYESTER used for D.C traction coils, wound coils and high voltage coils mono-component DIP,VPI H amber light 36 unflameable, flexible, resistant against chemicals & moisture oven dry
CC-1305  
DOLPHON POLYESTER general purpose mono-component DIP,VPI,trickle 212 amber light 12 high flame point, resistant against chemicals & moisture , Freon. Low resin concentration oven dry
CC-1105  
DOLPHON EPOXY used for random wound devicesdeveloping a substantial buildup of coating while affecting a high degree of penetration using the VPI method mono-component VPI F light 12 good penetration & maintenance, resistance against chemicals, moisture & thermal shock, compatible with different material. Thixotropic oven dry
CC-1115  
DOLPHON EPOXY used in VPI method for high voltage motors mono-component DIP,VPI H amber light 12 low corona, viscosity, excellent resistance against chemicals, excellent electrical properties in high temperature,thixothropic oven dry
CC-1118LV  
DOLPHON POLYESTER used for traction coils, wound coils & high voltage motors mono-component DIP, DIP in vacume condition, VIP H light 6 flexible, resistance against corrosion oven dry
CC-1133  
DOLPHON POLYESTER used for wound coils and also for enclosed motors mono-component DIP,VPI up to 220 amber light 12 low corona, excellent chemical & electrical resistance, highly flexible, high flame point oven dry
CC-1144  
DOLPHON POLYESTER  for traction motors, wound coils and high voltage motors mono-component DIP,VPI H amber light 36 unflameable, good adhesion,resistance against chemicals & moisture, flexible oven dry
CC-1305/503D  
                     
                     
 electronic boards covering varnish SYNTHITE POLYURETHANE as a varnish on electronic parts & electrical coils thinner brushing, dipping, spray up to 160 light 36 fast to dry, dries to tough and transparent film, resistant against chemicals & moisture air dry
AC-41  
SYNTHITE POLYESTER as a varnish on electronic parts & electrical coils, & transformators thinner brushing, dipping, spray up to 175 light 36    
AC -43  
SYNTHITE POLYURETHANE as a varnish on electronic parts & electrical coils thinner brushing, dipping, spray F light 36 resistance against moisture and dust air dry
AC-46  
SYNTHITE POLYURETHANE general purpose thinner brushing, dipping, spray 160 black 36 fast to dry, resistance against dust, corrosive chemicals & moisture. Dries to a semi-transparent film air dry
EB-41  
SYNTHITE POLYURETHANE general electrical application, used in rail way & marine industries thinner brushing, dipping, spray 160 red 36 fast to dry, resistance against dust, corrosive chemicals & moisture. Dries to a semi-transparent film air dry
ER-41  
                     
                     
 casting varnishes DOLPHON POLYURETHANE potting, casting & coating electrical & electronic devices. Also used as stress relief layer di-component     black 12 non-adhesive,good penetration & flexibility, good electrical properties air dry
CB-1135    
DOLPHON EPOXY coating & casting electrical or electronic elements di-component   B/F light 36 resistant against water & chemicals air dry B
CC-1024     oven dry F
DOLPHON EPOXY encapsulating, casting & coating coils di-component     red 12 semi-rigid, good thermal conductivity, machinable air dry
CC-1035      
DOLPHON EPOXY potting, casting & coating electrical & electronic devices. Also used as stress relief layer di-component   B/F black 36 dries to tough film, flexible, resistant against water & thermal shock, flame retardant air dry B
CB-1054     oven dry F
DOLPHON EPOXY   di-component   B red 36 flexible, machinable, good penetration and excellent adhesion air dry
CR- 1056 cementing iron, glass, ceramic, etc.    
DOLPHON EPOXY casting, filling gaps within electrical and electronic elements di-component   B/F black     air dry B
CB-1078         oven dry F
DOLPHON EPOXY casting and coating elec. Devices esp. in high temp. di-component   B/F light 36 average viscosity, resistant against water & chemicals air dry B
CC-1079     oven dry F
DOLPHON EPOXY casting esp. electronic elements di-component   B black 36    
CB-1088        
DOLPHON   filling the cavities & big magnet bowls di-component casting F/H   6 dries into a hard plastic substance, readily removeable for repair air dry
CC-1100    
DOLPHON POLYBUTADIENE casting esp. electronic elements & filling joint cables di-component   200 black 36 high flexibility, excellent electrical properties, resistance against chemicals & moisture air dry
CB-1109    
DOLPHON     di-component casting F/H light amber 6 like above but with better electrical properties air dry
CC-1120    
DOLPHON URETHANE protection against fire       cream 36 good flexibility, excellent chemical properties air dry
CN-1130          
  DOLPHON URETHANE casting or coating coils & transformators with a high flexibility di-component     cream 36 non-adhesive, good flexibility, good electrical properties air dry
CC-1135      
LC-705 CELLULOSIC FILM COMPOUNDED WITH PLASTICIZERS lacquer insulation for electronic parts such as yoke, small coils, sealing coils thinner brushing, dipping, spray up to 105 light 36 fast to dry, resistant against Corona, low power factor air dry
 
  DOLPHON EPOXY encapsulating and sealing wire di-component brushing, spray 155 black 36  dries into a flexible layer, high-low temperature flexibility, excellent resistance to chemical attack including acids and alkali air dry
CB-1128  
DOLPHON EPOXY casting and encapsulating & coating motor windings di-component dipping   red 12   air dry
CR-1034H      
DOLPHON EPOXY casting and encapsulating & coating motor windings di-component     red 12 semi-hard, good thermal conductivity, machinable air dry
CR-1035      
DOLPHON EPOXY encapsulating  windings, wet winding di-component brushing, dipping, spray F gray 36 encapsulating windings oven dry
CG-1062  
DOLPHON EPOXY protection against corrosion and physical stroke from outside di-component spray   brown 12   air dry
CW-1081      
EPOXAL EPOXY balancing rotors di-component brushing   yellow & blue paste 6 machinable, excellent addhesion, without any conductive particles oven dry
8810    
SYNTHITE   dries to an insulating and coating film, it protects stators, rotors, transformators, pole coils, rings and collectors as well thinner brushing, spray 175 black 36 dries to a tough film, resistant against corrosive materials & chemicals and dust, excellent addhesion air dry
EB-43/387D    
[1]
b: