Variable speed electric motors are widely used in industries that require speed and torque control. Industries such as hot and cold rolling lines of steel and other metals, the oil and petrochemical industry, rotating equipment in cement plants and mines are the most important consumers of variable speed electric motors. Variable speed motors can be designed and manufactured at different voltages and powers depending on the type of application and place of use.
In the process of designing and manufacturing variable speed electric motors, parameters such as heat transfer using cooling systems independent of motor speed, structural strength and shaft tensions on maximum torque at the lowest speed and maximum power must be particularly considered. In the design process of these electric motors, modal analysis techniques are used to ensure that no resonance occurs in the operating speed range of the electric motors.
Since heat loss is not constant in variable speed electric motors due to frequent changes in power and speed, degrading of the insulation system is usually considered as an important issue and necessary measures should be taken in the insulation system design. Variable speed electric motors manufactured by Roshd Sanat Niroo Company (RSN) are designed and manufactured by advanced insulation systems to address the maximum mechanical strength and thermal stability. Vacuum Pressure Impregnation (VPI) technology is used in the manufacture of this group of products.
Type of electric motor
|
Asynchronous Squirrel Cage
|
Power range
|
160kW Up to 10000Kw
|
Cooling systems
|
IC416 - IC516 - IC616 - IC661 - IC666 IC76W - IC86W
|
Voltage ( v )
|
400 - 690 - 6000 - 6300 - 6600 - 11000
|
Number of poles
|
…& 4Pole - 6Pole - 8 Pole - 10 Pole
|
Frame size
|
1000 - 900 - 800 - 710 - 630 - 560 - 500 - 450 - 400 - 355 - 315
|
Minimium protection level
|
IP 55
|
Ins. Class / Temp. Rise
|
F/B
|
Ambient temperature
|
20to +55˚C-
|
Mounting types
|
IMB3 - IMB5 - IMB35 - IMV1
|
Additional instruments
|
Space heater , Winding RTD ,Bearing RTD , Vibration sensor , Encoder
|
Standard
|
IEC 60034
|
It is possible to customize and change the standard specifications according to the customer's request.
It is possible to customize and change the standard specifications according to the customer's request.
Power range
|
3kW Up to 90Kw
|
Cooling systems
|
IC410
|
Voltage ( v )
|
400 - 690
|
Number of poles
|
…& 4Pole - 6Pole - 8 Pole - 10 Pole
|
Frame size
|
315 - 250 - 180
|
Minimium protection level
|
IP 56
|
Ins. Class / Temp. Rise
|
H/F F/B
|
Service factor
|
1.2 - 1.15 - 1.1 - 1
|
Ambient temperature
|
20to +55˚C-
|
Mounting types
|
IMB3 - IMB5 - IMB35
|
Standard
|
IEC 60034
|
Click to see drilling industry electric motors
Address: Roshd Sanat Niroo Company, 21st South Street, Hashtgerd Industrial City
Email: factory@roshdsanatniroo.com
Phone: +98 49052, +982644226107
Fax: +982644220260
Address: No. 23, Shahid Akbari St., 22 Bahman St., Ashrafi Esfahani Highway, Tehran
Email: headoffice@roshdsanatniroo.com
Phone: +98 49052, +982148000981
Fax: +982144424892
All rights belong to Roshd Sanat Niroo Company.